Overview

The Pro Stick can be installed as a simple replacement to any existing RTL-SDR USB receiver, or as part of a new PiAware.

The Pro Stick's high powered RF amplifier can lead to signal saturation if your receiver is operating in a heavily congested RF area. If the receiver is running in saturation mode, no signal will get through. In that case, it is necessary to install a 1090MHZ band-pass filter or reduce the gain.

Adjusting Gain

If you do not have a 1090MHZ filter and need to set the gain settings, it is necessary to specify the gain setting manually.

PiAware 3

Easy Configuration

If you have a PiAware 3 install, edit the piaware-config.txt file on the SD card image before loading it into your Pi and powering on. See the optional configuration settings instructions for how to edit your piaware-config.txt file.

You may set the gain from 0 to 50 or use -10 for maximum gain (automatic gain). Find the existing line in the configuration file labeled "rtlsdr-gain" or add a line if it does not exist. For example, to set the gain to 50, use:


rtlsdr-gain 50

Advanced configuration

Advanced users may connect directly to the Pi and use the piaware-config command on the commandline:


piaware-config rtlsdr-gain 50

To restart PiAware with the new gain, either reboot the Pi or restart dump1090 with this command:


sudo systemctl restart dump1090-fa

PiAware 2

If you have a PiAware 2 install, edit fadump1090.sh (or dump1090.sh) on your PiAware. This requires connecting directly to the Pi and using the commandline.


sudo nano /etc/init.d/fadump1090.sh

Allowable values are -10 and 0 to 50 (-10 is for a gain of 55). It is recommend the user starts with a gain of about 45 by editing the following line:


PROG_ARGS="--quiet --net --gain 45 --net-fatsv-port 0"

Save the changes and then restart dump1090:


sudo /etc/init.d/fadump1090.sh restart

लॉगिन

क्या आपका कोई खाता नहीं है? अनुकूलित विशेषताओं, फ्लाइट अलर्टों,और अधिक के लिए अब(नि:शुल्क) रजिस्टर करें!
Did you know that FlightAware flight tracking is supported by advertising?
You can help us keep FlightAware free by allowing ads from FlightAware.com. We work hard to keep our advertising relevant and unobtrusive to create a great experience. It's quick and easy to whitelist ads on FlightAware or please consider our premium accounts.
Dismiss